|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8
|
|
Sector
|
Power Plant Tenders
|
Tender Value
|
 21.40 Million / 2.14 Crore
|
|
Location
|
Rajasthan Tenders
|
Ref.No
|
36896105
|
|
Closing Date
|
14 - Nov - 2019
|
31 Days to go
|
View Tender Details
|
|
Supply of spares, shaft, thrust collar, impeller , balance drum, snap ring , throttle bush de, suction guide, socket hd cap screw (m12x45), ring section 1st stage, wear ring casing, wear ring diffuser, discharge cover, restriction bush, throttle bush nde, ring section 2nd & 4th stage, diffuser, diffuser 2nd stage, wearing ring 1st stage of diffuser, diffuser 1st stage, wearing suction casing, seal shaft sleeve, key 16x10x40, snapring , split ring , tension ring for thrust collar, split ring of spem make mdbfp/tdbfp at katpp.
|
|
|
|
|
|
10
|
|
Sector
|
Power Plant Tenders
|
Tender Value
|
2 Million / 20 Lakh
|
|
Location
|
Uttar Pradesh Tenders
|
Ref.No
|
36758824
|
|
Closing Date
|
13 - Nov - 2019
|
30 Days to go
|
View Tender Details
|
|
Supply of material - teflon washer (as per sample), rubber pad for cooling fans of uats (as per sample), cotton tape (roll of 20 mtrs), teflon tape (roll of 20 mtrs), ss fitting with ferrule as per sample for smart pressure & dp transmitter, cam operated rotary switch, 6a, 250v, 2 pole, 2 position on-off or 0-1, type-is 260, make-kaycee, 6 way cost alluminium housing with pendent push button station for hoist operation, slip ring for tt, slip ring for pf (power), carbon brush with holder suitable for tt slip ring, carbon brush with holder suitable for pf (power) slip ring, carbon brush with holder suitable for pf (control) slip ring, dol stater (on/off) for 15 kw sump pump motor, dol stater (on/off) for 7.5 kw sump pump motor, electrical resistance with specification: 02 ohm, 400 watt, wire size-16swg, insulator dia-40mm, length-255mm, break lining/shoes for hoist rotor: width-70mm, thickness-4mm., crc suitable for on line contact cleaner (200ml pack), ht tape: size-1mmx40mmx10mtr, insulation friction cotton tape, size:19mmx20m suitable for 600v, make-johnson, mcb of 16a, mcb of 32a, mcb of 64a, mcb of 125a, mcb of 300a, fuse (tia type) of 16a, fuse (tia type) of 32a, fuse (tia type) of 64a, vacuum hose pipe of 25 nb of 20 mtrs. for f/m, fuse of ns type of 4a, fuse of ns type of 16a, "20’/50’ aluminium tilt table tower ladder (moving), specifications: made from sides of “c” section and steps 1” dia non slip corrugated tubing, complete with safety locks, tool tray, safety gate, cage platform. extra heavy duty section-68.68mmx31.75mmx3mm as per is, temper t-6, steps-aluminium round pipe of 26mm at a distance of 300mm (12 inch). standard as per is temper t-6, winch (gear box)- 2 heavy duty winch. weight capacity 1 ton each, platform size: 17”x20” at the top covered with three sides made on ms angle 32mm and covered with rubber sheet. platform placed 3ft below from top, trolley size: 6ftx10ft, made from ms channel of 100mmx50mmx6.5mm, side angle: ms angle 40mmx40mmx5mm, steel rope: tested rope of 8mm, wheels standard ms forged solid rubber casted special wheels (2ft & 2 swivel) with ball bearing with tow bar. wheels weight capacity 1 ton, tool tray size: 23inches x 5 inch made of aluminium section pipe, 4 parking jack will be attached to the trolley, sides: channel section 25/8” x ¼ “ dia approx, ", ss tube size: 4x6mm, ss tube size:6x8mm, teflon tube size:3x5mm, teflon tube size:4x6mm, teflon tube size:6x8mm, ss ferrule for 4x6mm pipe, ss ferrule for 6x8mm pipe, ferrule for teflon tube size:3x5mm, ferrule for teflon tube size:4x6mm, ferrule for teflon tube size:6x8mm, nipple for teflon tube size:3x5mm, nipple for teflon tube size:4x6mm, nipple for teflon tube size:6x8mm, glass fuse 0.5 amp, glass fuse 1.0 amp, fuse cartridge for acs panel (as per sample), "lightning station arrestor for 33kv with complete acessories standard-9l11lah/a/030 , specification:- normal system voltage 33 kv, rating kv (rms) 30 kv, max. continuous operating voltage 20 kv rms, nominal discharge current (ka) 25 kv peak, line discharge class 10, energy discharge capability (kj/kv) of reted voltage not less than 3kj/kv, lighting impluse residual voltage, (kvp), (5 ka 80, 10 ka 88, 20 ka95), maximum steep front current, impulse residual voltage (kvp) (10 ka for 10 ms) 100, ", 20 amp single pole mcb with breaking capacity 10 ka, 32 amp single pole mcb with breaking capacity 10 ka , 5 amp piano switch , 5 amp socket, 15 amp piano switch , 15 amp socket, screw type ceramic holder (thread type) for 125 watt hpmv lamp (base cap e27), ceramic holder for (thread type )150 watt to 400 watt hpmv lamp (base cap e 40), supply of 10 feet aluminium heavy duty stool cum ladder with platform (10 feet height), tyre coupling -013-tc/q, max. bore-50 mm, max. speed-3750 rpm, o.d. (a)-188mm, coupling length (l) -145 mm, hub dia. (d)-80mm, flange length (e)-53 mm. gap between two flange (m)-39 mm., "bourdon type pressure gauge rounded dial of folllowing sizes and following specification- accuracy : + 0.5% as per is 3624, block : extruded brass, bourdon: ss316, movement : ss 316, mounting : direct with bottom entry, case: caste aluminium weather proof ip-65, standard fitments : micro adjustable pointer blow out disc, range: 0-1 kg/cm2 , ", crape paper roll (0.175x40mm), crape paper roll (0.175x25mm), cotton tape roll (0.40x40mm), cotton tape roll (0.125x40mm), gasket sheet 610x915x6 mm, niwar tape, bulb-t 3 ¼ e-10 24/28v, 40 ma, 4-5 lumens, length 28mm dia 10mm, boiler manual trip push button cum indicator in round shape single piece. display screen : red color supply voltage: 220 vdc contact: 01no+01nc, diameter: 29mm, "procurement of following items for mill dp system , air filter pressure regulator with auto drain assembly, pressure gauge & both end union socket to connect the ½” air line , max. pressuer rating 18kg/cm2,max. i/p press.15kg/cm2, o/p press. 0-10kg/cm2, operating press. 5-7kg/cm2, process conection ½” npt(f), service :
|
|
|